5 example procedures, 5 example procedures -21, Automatic flight control system – Garmin G1000 Mooney M20TN User Manual
Page 321: Figure 7-21 flight plan overview
190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
7-21
AUTOMATIC FLIGHT CONTROL SYSTEM
7.5 EXAMPLE PROCEDURES
NOTE:
The diagrams in this section are for instructional purposes only and should not be used for
navigation.
This section provides a scenario-based set of procedures showing various GFC 700 AFCS modes used during
a flight. In this scenario, the aircraft departs Reid-Hillview Airport (KRHV) from runway 13L, enroute to Fresno
Yosemite International Airport (KFAT). Per the filed flight plan, the aircraft climbs to an altitude of 7000 feet MSL
at a heading of 070° to intercept airway V107.
Airway V107 is flown to Panoche VORTAC (PXN) using VOR navigation, then airway V230 is flown using a
GPS flight plan. On this leg, the aircraft descends to 3000 feet prior to reaching Clovis VORTAC (CZQ) and the
ILS approach to R29R at KFAT is loaded. The ILS approach is flown and a missed approach is executed.
0
3
6
9
12
15
18
21
24
27
30
33
0
3
6
9
12
15
18
21
24
27
30
33
070
Panoche
VORTAC
(PXN)
KFAT
KRHV
V 230
Clovis
VORTAC
(CZQ)
V 107
Figure 7-21 Flight Plan Overview