Garmin G1000 Mooney M20TN - Manual (Page 263)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 6-27
HAZARD AVOIDANCE
Setting up and customizing the Navigation Map Page:
1) On the Navigation Map page, press the MENU Key.
2) While the ‘Map Setup’ selection is highlighted, press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. To select the ‘Weather Group’, turn the FMS
Knob and press the ENT Key.
4) While the Map Setup menu is displayed, turn the large FMS Knob to highlight and move between the product
selections.
5) When an item is highlighted, turn the small FMS Knob to select the desired option.
6) Press the ENT Key.
The following options are available:
• NEXRAD DATA – Turns the display of NEXRAD data and radar coverage on or off. Selects the display
range.
• XM LTNG – Turns the display of XM Lightning on or off. Selects the display range.
• CELL MOVEMENT – Turns the display of storm cell movement on or off. Cell Movement is shown only
when NEXRAD is turned on.