Garmin G1000 Mooney M20TN - Manual (Page 44)

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 190-00647-00 Rev. A 1-34
SYSTEM OVERVIEW
The Checklist Page displays the following:
• Selected procedure group
(number of procedure groups
depends on airframe)
• Selected checklist title
• Selected checklist text:
– Plain text
– Notes, Cautions, and
Warnings
– Challenge/Response pairs
– Challenges with no responses
– Check state of items
– Checklist complete indicator
Navigating a checklist:
1) From any page, select the CHKLIST Softkey.
2) Turn the large FMS Knob to select the ‘GROUP’ field.
3) Turn the small FMS Knob to select the desired procedure.
4) Press the ENT Key.
5) Turn the large FMS Knob to select the ‘Checklist’ field.
6) Turn the FMS Knob to select the desired checklist.
7) Press the ENT Key.
8) With the desired checklist displayed, turn the FMS Knob to move up and down the checklist and highlight an
item with a hollow white rectangle. The default color for non-selected checklist items is blue; once an item is
highlighted, it turns white.
Press the CLR Key to remove a check mark from an item.
9) Once the last item in a checklist is selected, ‘GO TO THE NEXT CHECKLIST?’ is highlighted. Press the ENT Key
to advance to the next checklist displayed.
10) To select a checklist item that is highlighted, press the ENT Key or DONE Softkey. Selected items turn green and
checkmarks are placed in the boxes next to the item. After an item is selected, the next item is automatically
highlighted for selection.