Garmin G1000 Mooney M20TN - Manual (Page 148)

5-30
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
Figure 5-24 Nearest Airport List
3) Turn the small FMS Knob to the right to display the ‘NRST’ airports to the aircraft’s current position as shown in
Figure 5-24.
4) Select the desired airport.
5) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
6) Press ENT again to activate a Direct-to.
Re-centering the CDI to the destination waypoint:
Press the Direct-to Key, followed by pressing the ENT Key twice. If a missed approach point (MAP) is the
current destination, the approach will be canceled.
Manually defining the active Direct-to:
1) Press the Direct-to Key.
2) Place the cursor in the ‘COURSE’ field.
3) Enter the desired course.
4) Press the ENT Key. The cursor now highlights ‘ACTIVATE?’.
5) Press the ENT Key again to begin navigation using the selected destination, altitude constraint, and course.
NRST Waypoints