Garmin G1000 Mooney M20TN - Manual (Page 217)

5-99 190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
GPS NAVIGATION
S
TORE
F
LIGHT
P
LAN
The active flight plan is erased when the G1000 is powered off or when another flight plan is activated.
When storing flight plans with an approach, departure or arrival, the G1000 uses the waypoint information
from the current database to define the waypoints in the flight plan. If the navigation database is changed
or updated, the G1000 automatically updates the information if the procedure has not been modified. If an
approach, departure or arrival procedure is no longer available, the flight plan becomes “locked” until the
procedure is deleted from the flight plan or until the correct navigation database is installed.
Storing a flight plan:
1) From the Flight Plan Window (once all of the waypoints have been entered), press the MENU Key to display the
page MENU.
2) Select ‘Store Flight Plan’.
3) Press the ENT Key. The Store Flight Plan Window is displayed with ‘OK’ highlighted.
4) Press the ENT Key to store the flight plan in the next available memory slot.
5) Press the ENT Key.
I
NVERT
F
LIGHT
P
LAN
‘Invert Flight Plan’ reverses the active flight plan. After traveling along a flight plan, the pilot may wish to
reverse the route for navigation back to the original departure point.
Activating an existing flight plan in reverse:
1) From the Flight Plan window, press the MENU Key.
2) Highlight ‘Invert Flight Plan’.
3) Press the ENT Key. A confirmation window is displayed.
4) Select ‘OK’.
5) Press the ENT Key. The flight plan is now reversed and activated.