Garmin G1000 Mooney M20TN - Manual (Page 183)

5-65
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
Selecting a nearest FSS and frequency:
1) With the Nearest ARTCC Page displayed, press the FSS Softkey to place the cursor in the ‘NEAREST FSS’
window.
2) Turn the small FMS Knob to select the desired nearest FSS.
3) Turn the large FMS Knob to select the desired FSS frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
OR:
1) With the Nearest ARTCC Page displayed, press the MENU Key.
2) Select the option ‘Select FSS Window’ and press the ENT Key. The cursor is placed in the ‘NEAREST FSS
window.
3 ) Turn the small FMS Knob to select the desired nearest FSS.
4) Turn the large FMS Knob to select the desired FSS frequency.
5) Press the ENT Key to load the FSS frequency into the COM frequency standby field.
Selecting a nearest weather frequency:
1) With the Nearest Frequencies Page displayed, press the WX Softkey to highlight the frequency in the ‘WX
FREQUENCY’ field.
2) Turn the FMS Knob to select the desired weather frequency.
3) Press the ENT Key. The selected weather frequency is placed in the COM standby frequency box.
4) Press the FMS Knob to remove the flashing cursor.
OR:
1)
With the Nearest ARTCC Page displayed, press the MENU Key.
2) Select the option ‘Select WX Window’ and press the ENT Key. The cursor is placed in the ‘NEAREST WX
window.
3 ) Turn the FMS Knob to select the desired nearest WX frequency.
4 ) Press the ENT Key to load the WX frequency into the COM frequency standby field.
5) Press the FMS Knob to remove the flashing cursor.