Garmin G1000 Mooney M20TN - Manual (Page 184)

5-66
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
5.16 NEAREST AIRSPACES
The G1000 alerts the pilot to as many as nine controlled or special use airspaces (three at the most at one
time) near or in the flight path. The airspace name, class, controlling agency, vertical limits and associated
frequencies are displayed for the selected airspace.
NOTE: Softkeys and page menu options are the method for the user to switch between the airspace alerts
box and the frequencies box, with the airspace alerts box being the default. The selection of these options
are mutually exclusive and only one list is actively selectable at any given time. The ALERTS softkey is always
displayed. If the ALERTS softkey is pressed then the airspace alerts box becomes active and open to user
selection.
Figure 5-60 Nearest Airspaces Window
Airspace Alerts
Airspace Type
and Controlling
Agency
The Ceiling and
Floor Altitudes
(vertical limits)
Note: At most, three
airspace alerts are
shown at any given time
Associated
Frequencies for
the currently
selected Airspace
Alert
Selecting and viewing an Airspace Alert with its associated information:
1) Select the Nearest Airspace Page by selecting the ‘NRST;’ page group and then select the seventh page in the
group.
2) Press the ALERTS Softkey to place the cursor in the ‘AIRSPACE ALERTS’ box (Figure 5-60).
3) Select the desired airspace.
4) Press the FMS Knob to remove the flashing cursor.