Garmin G1000 Mooney M20TN - Manual (Page 268)

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 190-00647-00 Rev. A 6-32
HAZARD AVOIDANCE
SELECTING THE STORMSCOPE PAGE
If Stormscope is installed, the Stormscope Page is the third rectangular icon in the Map group of pages.
Stormscope lightning data can be displayed 25 nm, 50 nm, 100 nm, and 200 nm. Lightning data can be
displayed in ‘CELL’ or ‘STRIKE” mode in the 360˚ or 120˚ view.
Figure 6-42 Stormscope Page
Changing between ‘cell’ and ‘strike’ mode on the Stormscope Page:
1) Select the Stormscope Page.
2) Press the MODE Softkey. The CELL and STRIKE softkeys are displayed.
3) Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4) Press the BACK Softkey to return to the main Stormscope page.
Changing the viewing mode between 360˚ and 120˚ on the Stormscope Page:
1) Select the Stormscope Page.
2) Press the VIEW Softkey. The 360 and ARC softkeys are displayed. Press the 360 Softkey to display a 360˚
viewing area or press the ARC Softkey to display a 120˚ viewing area.
3) Press the CLEAR Softkey to remove all Stormscope lightning data from the display.
4) Press the BACK Softkey to return to the main Stormscope page.