Displaying terrain proximity data, Hazard avoidance – Garmin G1000 Mooney M20TN User Manual

Page 270

Advertising
background image

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

190-00647-00 Rev. A

6-34

HAZARD AVOIDANCE

�������

�����������������

�����������������

��������������������������������

Figure 6-43 Terrain Proximity Indications and Colors

In Figure 6-43, terrain elevation is shown relative to the aircraft altitude. Obstacle colors are displayed in Table

6-5. Terrain and obstacles that are above the aircraft or less than 100 feet below the aircraft altitude are shown
in red. Those between 100 feet and 1000 feet below the aircraft altitude are shown in yellow. Terrain lower than
1000 feet below the aircraft altitude is shown in black. Obstacle data is displayed in gray when the difference in
aircraft altitude and obstacle height is greater than 1000 feet.

Terrain Color

Terrain Location

Red

Terrain above or within 100 ft below the aircraft altitude

Yellow

Terrain between 100 ft and 1000 ft below the aircraft altitude

Black

Terrain more than 1000 ft below the aircraft altitude

Table 6-5 Terrain Proximity Colors

DISPLAYING TERRAIN PROXIMITY DATA

Terrain and obstacle information can be displayed on the following pages:

• Terrain Proximity Page

• AUX - Trip Planning Page

• Navigation Map

• Flight Plan Pages (except VNAV)

• PFD Inset Map

To display terrain and obstacle data on any page other than the Terrain Proximity Page, press the MAP

Softkey, then press the TERRAIN Softkey. Obstacles with heights greater than 200 feet above ground level
(AGL) are displayed in three color levels (Table 6-6). The G1000 adjusts colors automatically as the aircraft
altitude changes.

Terrain Proximity may also be deselected from the Inset Map without affecting the terrain display on the MFD

maps.

Advertising
This manual is related to the following products: