Garmin G1000 Mooney M20TN - Manual (Page 30)

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 190-00647-00 Rev. A 1-20
SYSTEM OVERVIEW
Turning the knob to the right scrolls through the alphabet (where appropriate) toward the letter Z, starting in
the middle at K, and the digits zero through nine. Turning the knob to the left scrolls in the opposite direction.
4) Use the large FMS Knob to move the cursor to the next placeholder in the field.
5) Repeat, using the small FMS Knob to select a character and the large FMS Knob to move the cursor, until the
field is complete.
6) Press the ENT Key to confirm entry.
7) Press the FMS Knob or CLR Key to cancel data entry (the field reverts back to its previous information).
PAGE GROUPS
NOTE: Refer to other supporting sections in this Pilot’s Guide for details on specific pages.
Information on the MFD is presented on pages which are grouped according to function. The page group
and active page title are displayed in the upper center of the screen in light blue. In the bottom right corner of
the screen, the current page group, number of pages available in the group, and placement of the current page
within the group are indicated by icons. For some of these pages (Airport/Procedure/Weather Information, XM,
Procedure Loading), the title of the page changes while the page icon remains the same.
Figure 1-22 Page Title and Page Group Icons
MFD
Page Group Active Page Title
Page Groups
Selected Page
Pages in Current Group
There are four main page groups, navigated using the FMS Knob; specific pages within each group can vary
depending on the configuration of optional equipment.
Selecting a page using the FMS Knob:
1) Turn the large FMS Knob until the desired page group is selected.
2) Turn the small FMS Knob until the desired page is selected.