Ohaus Voyager Balances - Manual (Page 130)

66
7.6 Setting GLP print options
This menu GLP (Good Laboratory Practices) options allows the entering of a Project Name, User Name, and GLP
Print Options which include: Date & Time, Balance ID, Project Name, User Name and Calibration all of which can be
set ON or OFF.
Enter project name
Enter PROJECT NAME, the display advances to permit entering project name.
From main menu
Select SET BALANCE and press the Enter button. Display advances to SET
BALANCE with READOUT highlighted. Scroll to SETUP GLP and press the
Enter button, display advances SETUP GLP
with PROJECT NAME high-
lighted.
SET BALANCE
SETUP GLP
Enter
SETUP GLP
PROJECT NAME
SETUP GLP
Enter
PROJECT NAME
Specify the project name
Specify the project name. The name can have any combination of alpha
numeric characters not to exceed 8 characters. After specifing the project
name, the display advances to USER NAME.
Select user name
SETUP GLP
USER NAME
SETUP GLP
Enter
USER NAME
GLP PRINT OPTIONS Setting GLP print options
GLP PRINT OPTIONS permit DATE & TIME, BALANCE ID, PROJECT NAME,
USER NAME, and CALIBRATION DATA to be turned ON or OFF for printing.
DATE & TIME OFF
BALANCE ID OFF
PROJECT NAME OFF
USER NAME OFF
CALIBRATION OFF
RETURN
or
Setting functions on or off
Select each of the above functions and select either ON or OFF.
STABLE DATA
ON
OFF
or
Enter
Specify the user name
Specify the user name, and press Enter button. The display advances to
GLP PRINT OPTIONS. Press Enter, the display advances to GLP PRINT
OPTIONS with DATE & TIME highlighted.
Balance settings