Ohaus Voyager Balances - Manual (Page 223)

70
Balance settings
7.11 Software version
This option allows you to view the software version number, date installed and main board version number. These
numbers are very important for servicing. To view software version, proceed as follows;
Enter
From main menu
Enter SET BALANCE. Select SOFTWARE VERSION, press the Enter button, the
software version is indicated on the display. Keep a written record of this
information in the event servicing is required and the display does not work.
Software Version_______________________________.
SET BALANCE
SOFTWARE VERSION
7.12 Setting custom menu
This option allows you to enter specific balance functions. These functions can be selected conveniently from this
menu to operate the balance in a RUN mode. There are 18 items which can be selected and are listed with the
associated paragraphs in the following table.
Enter
From main menu
Enter the CUSTOM MENU and select SETUP CUSTOM MENU. Review list on
menu shown in table.
CUSTOM MENU
RUN
SETUP CUSTOM MENU
LIST OF CUSTOM MENU ITEMS
FILLING
CHECK WEIGHING
ANIMAL WEIGHING
PARTS COUNTING
DIFF WEIGHING
QUICK CHECK
FORMULATION
STATISTICS
DENSITY
Setting functions on or off
Select any of the functions and set either ON or OFF.
STABLE DATA
ON
OFF
or
Enter
SQC
PIPETTE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL ENABLE
PRINT CURRENT SETTINGS
CUSTOM MENU
RUN
SETUP CUSTOM MENU
To run a particular function, select RUN and press the Enter button. Enter