Ohaus Voyager Balances - Manual (Page 45)

39
Go Back
Help
Print Enter
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
4.4 Setup GLP
Go Back
Help
Print Enter
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
SETUP GLP
PROJECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE
SETUP GLP
PRO JECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
ENTER PROJECT NAME
<UP>/<DOWN> TO SCROLL CHARACTERS
<LEFT>/<RIGHT> TO MOVE CURSOR
<ENTER> TO ACCEPT
<BACK> TO ABORT
Procedure
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select SET BALANCE.
• Press Enter button.
• Press or arrow button and select SETUP
GLP.
• Press Enter button.
• Press or arrow button and select
PROJECT NAME.
• Press Enter button.
• Continue in the menu and enter the User Name,
GLP Print Options (these are limited to 10characters
each) and then save. The GLP Print Options can be
set ON or OFF.
• After making all selections in Setup GLP, press
arrow button and select SAVE & EXIT.
• Press Enter button, display returns to WEIGHT dis-
play.
Setup GLP (Good Laboratory Practices) menu allows
the selection of Time, Balance Identification Number,
Identification Number, Project Number, Calibration and
Name data to be printed. The purpose of this menu is to
permit the printing of the above selected items. These
items are not displayed. The default setting is off. When
an external printer is used, and all items are set ON and
the balance is calibrated, the printer will print out calibra-
tion data for audit trail purposes and will indicate date,
and time. Since there are many displays used in this
procedure, not all are shown.
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
SETUP GLP
PROJECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
SETUP GLP
PROJECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
ENTER USER NAME
<UP>/<DOWN> TO SCROLL CHARACTERS
<LEFT>/<RIGHT> TO MOVE CURSOR
<ENTER> TO ACCEPT
<BACK> TO ABORT
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOVK OUT
SOFTWARE VERSION
SETUP GLP
PROJECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
MAIN MENU
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE CHANGE UNITS SET BALANCE
SETUP BALANCE
READOUT
INTERFACE
PRINT OPTION
SETUP GLP
SET TIME/DATE
AUTOCAL
PRINT CURRENT SETTINGS
RESET
LOCK OUT
SOFTWARE VERSION
SETUP GLP
PROJECT NAME
USER NAME
GLP PRINT OPTIONS
SAVE & EXIT
EXIT TO WEIGH
GLP PRINT OPTIONS
DATE & TIME OFF
BALANCE ID OFF
PROJECT NAME OFF
USER NAME OFF
CALIBRATION OFF
SAVE & EXIT
EXIT TO WEIGH