Ohaus Voyager Balances - Manual (Page 24)

18
Go Back
Help
Print Enter
3.9 Check Weighing
Check weighing mode permits you to weigh an item, set balance parmeters such as the nominal weight, over weight,
under weight, type of display: normal shown with a bar graph and a numeric display or sign which spells out under,
accept, over in large letters and assign a library name. This can then be recalled later eliminating the need to enter
weighing parameters again. This type of weighing is where individual items must be checked against preset param-
eters. Since many displays are repetitive, not all will be shown in the following procedure
MAIN MENU
CHANGE UNITS SET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
Procedure
• Press arrow button to select MAIN MENU.
• Press Enter button.
• Using the arrow buttons, select CHANGE MODE.
• Press Enter button.
• Press or arrow button and select CHECK
WEIGHING.
• Press Enter button.
• Press or arrow button and start with NOMI-
NAL WT.
• Press Enter button.
• Using the arrow buttons, enter the NOMINAL WT
value, then, press Enter button.
• Repeat steps and enter parameters for OVER WT,
and UNDER WT.
• Enter a library name for the object of measurement
and press Enter button.
• Press arrow button and select SAVE TO
LIBRARY and press Enter button.
• Press arrow button and select RUN.
• Press Enter button.
• Place item to be checked on the balance pan, the
normal display indicates the weight of the item. The
bar graph indicates whether the item is under ,
accepable or over in weight based on the settings
made in the balance.
Display below illustrates a 300 gram sample weight.
0.00
WEIGHT
0% 100%
GRAMS STABLE
MOVE HIGHLIGHT MAIN MENU CONTRAST
Go Back
Help
Print Enter
CHECK WEIGHING
OVER
GRAMS STABLE
NEW MAIN
OVER = 305.00
UNDER = 295.00
NOMINAL = 300.00
DIFF = -0.04
CONTRAST
299.96
UNDER ACCEPT
STOP
MAIN MENU
CHANGE UNITSPART S ET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTIC
DENSITY MAIN MENU
CHANGE UNITSPART S ET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILL
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
SETUP
NOMINAL WT 300.0 0
OVER WT 0.00
UNDER WT 0.00
LIBRARY NAME
SAVE TO LIBRARY
RUN
EXIT TO WEIGH
MAIN MENU
CHANGE UNITSPART S ET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILingL
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FOR
QUICK CHECK
STATISTIC
DENSITY
SETUP
NOMINAL WT 0.0 0
OVER WT 0.00
UNDER WT 0.00
LIBRARY NAME
SAVE & EXIT
R
EXIT TO WEIGH
SET NOMINAL WEIGHT
UP/DOWN TO SCROLL CHARACTERS
LEFT/RIGHT TO MOVE CURSOR
ENTER TO ACCEPT
BACK TO QUIT
0.00
MAIN MENU
CHANGE UNITSPART S ET BALANCE
RETURN TO
WEIGH
CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTIC
DENSITY
SETUP
NOMINAL WT 0.0 0
OVER WT 0.0 0
UNDER WT 0.00
LIBRARY NAME
SAVE & EXIT
R
EXIT TO WEIGH
SET OVER WEIGHT
<UP>/<DOWN> TO SCROLL CHARACTERS
<LEFT>/<RIGHT> TO MOVE CURSOR
<ENTER> TO ACCEPT
<BACK> TO ABORT
0.00 MAIN MENU
CHANGE UNITSPART S ET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFFIAL WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
SETUP
NOMINAL WT 0.0 0
OVER WT 0.00
UNDER WT 0.00
LIBRARY NAME
SAVE & EXIT
R
EXIT TO WEIGH
SET UNDER WEIGHT
<UP>/<DOWN> TO SCROLL CHARACTERS
<LEFT>/<RIGHT> TO MOVE CURSOR
<ENTER> TO ACCEPT
<BACK> TO ABORT
295.00
MAIN MENU
CHANGE UNITSPART S ET BALANCE
LIBRARY CALIBRATION CUSTOM MENU
CHANGE MODE
CHANGE MODE
BASIC WEIGHING
PARTS COUNTING
FILLING
ANIMAL WEIGHING
CHECK WEIGHING
DIFF WEIGHING
FORMULATION
QUICK CHECK
STATISTICS
DENSITY
SETUP
NOMINAL WT 0.0 0
OVER WT 0.00
UNDER WT 0.00
LIBRARY NAME
SAVE & EXIT
R
EXIT TO WEIGH
LIBRARY NAME
<UP>/<DOWN> TO SCROLL CHARACTERS
<LEFT>/<RIGHT> TO MOVE CURSOR
<ENTER> TO ACCEPT
<BACK> TO ABORT
NAME