Ohaus Voyager Balances - Manual (Page 230)

77
RS232 Interface/printing data
Span calibration printout
When performing a Span calibration with GLP turned ON, a printout is
automatically made after the calibration mass is placed on the pan.
- - - - - SPAN CAL - - - - - -
12/01/99 1:00:00 PM
Bal Id 1234
Cal:
400.000g
Old: 400.000g
Dif: 0.000g
Wt. Ref...................................... USER
NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
Linearity calibration printout
When performing a Linearity calibration with GLP turned on, a printout is
automatically made after the calibration mass is placed on the pan.
- - - - - LIN CAL - - - - - -
12/01/99 1:00:00 PM
Bal Id 1234
Cal:
400.000g
Old: 399.094g
Dif: 0.006g
Wt. Ref...................................... USER
NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
Calibration test printout
When performing a Calibration Test with GLP turned on, a printout is
automatically made after the calibration mass is placed on the pan.
- - - - - CAL TEST - - - - - -
12/01/99 1:00:00 PM
Bal Id 1234
Cal:
400.000g
Act: 400.004g
Dif: 0.004g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -