Ohaus Voyager Balances - Manual (Page 276)

35
Balance modes
Enter
CHECK WEIGHING SETUP
LIBRARY NAME
NOMINAL
OVER
UNDER
RUN
Enter
CHECK WEIGHING SETUP
Select RUN.
6.4 Check weighing
Check weighing is used when items are checked against preset balance parameters. This feature permits you to
weigh an item, assign a library name, set balance parameters such as the nominal weight, over weight and under
weight. Library recall eliminates the need to enter the weighing parameters again. A bar graph at the top of the Check
Weighing screen indicates UNDER, ACCEPT and OVER for items being checked.
From main menu
Enter CHANGE MODE. Select CHECK WEIGHING, display advances to
LIBRARY NAME.
CHECK WEIGHING SETUP
LIBRARY NAME
Enter a Library Name, up to 8 characters and press Enter button. Display
advances to NOMINAL WT entry. If a previous name was entered and
selected, the balance displays the parameters which were set.
Enter the Nominal option.
LIBRARY NAME
NOMINAL
OVER
UNDER
RUN
CHECK WEIGHING SETUP
NOMINAL WT
Enter the nominal weight and then enter over and under weights. Press
Enter button after each entry.
200.026
CHECK WEIGHING
UNDER ACCEPT OVER
MAIN MENU
CHECK WEIGHING
CW1
200.000
OVER: 202.000 NOMINAL: 200.00
UNDER: 199.000 DIFF: 0.026
Place the item to be checked on the balance pan, the display indicates the
over, under, nominal and difference weight of the item. The bar graph
indicates UNDER, ACCEPT and OVER.