Ohaus Voyager Balances - Manual (Page 328)

87
Appendix A - special applications
WEIGH IN AIR: 207.457 TEMP: 25.0
WEIGH IN LIQ: 204.005 AUX: D:0.9971
DRY WEIGHT: 200.040 VOLUME: 3.59
Enter oil density
Enter the density of the oil being used to impregnate the part. Press Enter
button. Display advances to RETURN TO SETUP highlighted. Press Enter
button. Display returns to DENSITY SETUP with AUTO SAMPLE highlighted.
AUX LIQ & MODE
H20 <-SELECTED
OTHER
POROUS MATERIAL ON
DRY WEIGHT 200.040
DENSITY OF OIL 0.4000
RETURN TO SETUP
Testing the sample
Select RUN and press Enter button. Display advances to final DENSITY
display and requests to weigh the sample in air.
DENSITY SETUP
LIBRARY NAME D2
SOLID DENSITY <-SELECTED
LIQUID DENSITY
AUTO SAMPLE OFF
AUTO PRINT OFF
RUN
Now follow balance prompts to weigh sample in air and water. After weigh-
ing in air, weigh the sample in water. The balance will calculate Dry Density
and Oil Content by Volume (P1).
START/SAMPLE SETUP MAIN MENU
57.779
DENSITY - - D7
GRAMS/CC STABLE
Enter
DENSITY SETUP
Enter
LIBRARY NAME D2
SOLID DENSITY <-SELECTED
LIQUID DENSITY
AUTO SAMPLE OFF
AUTO PRINT OFF
RUN
Auto sample
Select AUTO SAMPLE and turn it ON or OFF. A setting of ON allows samples
to be sequentially sampled without pressing the Enter button for each
sample.
DENSITY SETUP
Enter
LIBRARY NAME D2
SOLID DENSITY <-SELECTED
LIQUID DENSITY
AUTO SAMPLE OFF
AUTO PRINT OFF
RUN
Auto print
At this point you can select automatic printing. To turn on, press the Enter
button and select ON. If you do not want automatic printing, select OFF.
P1: 535.58% WEIGH IN AIR
To determine wet density
Wet density of the sample can be calculated by following the normal Solid
Density procedure using the oil impregnated part. When in AUX LIQ MODE
menu, turn OFF POROUS MATERIAL, then follow previous solid density
measuring procedure.
LIMITED WARRANTY
Ohaus products are warranted against defects in materials and workmanship from the date of delivery through the duration
of the warranty period. During the warranty period Ohaus will repair, or, at its option, replace any component(s) that proves
to be defective at no charge, provided that the product is returned, freight prepaid, to Ohaus.
This warranty does not apply if the product has been damaged by accident or misuse, exposed to radioactive or corrosive
materials, has foreign material penetrating to the inside of the product, or as a result of service or modification by other than
Ohaus. In lieu of a properly returned warranty registration card, the warranty period shall begin on the date of shipment to
the authorized dealer. No other express or implied warranty is given by Ohaus Corporation. Ohaus Corporation shall not be
liable for any consequential damages.
As warranty legislation differs from state to state and country to country, please contact Ohaus or your local Ohaus dealer
for further details.