Ohaus Voyager Balances - Manual (Page 52)

46
>O/T<
>O/T<
OHAUS ®
0.00
NET WEIGHT
0%
100%
CENTER OF 0 CONTRAST
GRAMS
UNSTABLE
MOVE HIGHLIGHT
MAIN MENU
Enter
Go Back
Help
Print
4.11 Menu Lock-Out Protection
Access to the various menus can be disabled setting the Lockswitch located on the PC board inside the balance to
OFF position. The Lockswitch locks out certain menus when Legal For Trade is turned ON. The default setting for
the Lockswitch is OFF.
Type Approved/Legal for Trade
Balance Sealing
All Voyager balances may be sealed for type approved/
legal for trade applications. Type Approved balances
include a lead seal with wire and security screw as shown
in the figures.
For type approved balances consult local Weights and
Measures officials to determine sealing method require-
ments.
After the balance has been set up properly and LFT is set
ON, proceed to seal the balance.
Procedure
• Turn the display off and unplug the power cord.
• On balances with a draft shield, slide the door open
and remove the pan and cover plate. Higher capacity
balances with a 6" or 8" pan do not have a cover
plate.
• On balances without a draft shield, remove the pan
and cover plate.
• Remove the protective cover seal.
• The Lockswitch is located to the left of the pan
support hole.
• Select the desired position on the Lockswitch and
reassemble the balance.
Cover Seal
Lead Seal
Example of Sealing Method
Sealing Screw
Lock Switch
shown in Locked
Position
Cover Plate
Pan