QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 159)

159
6.6.3 Schedule Settings
You can select continuous recording or scheduled recording. The default setting is
continuous recording. To set up a recording schedule, select a camera number on the list.
Then select the date and time and click ‘Add’. Click ‘Apply’ to save the settings for the
particular IP camera or click ‘Apply to all cameras’ to apply the settings to all the IP cameras.
To delete a schedule, click ‘Remove’ on the schedule list.
Note:
1. You can add up to 15 schedules.
2. All the settings will not take effect until you click ‘Apply’. When applying the changes,
the recording will stop for a while (maximum 1 minute) and then restart.