QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 82)

82
8.
After configuring the auto cruising settings, select the option ‘Enable auto cruising’ and
click ‘OK’. The NVR will start auto cruising according to the settings.
Note:
1) The default staying time (interval) of the preset position is 5 seconds. You can enter
5–999 seconds for this setting.
2) The system supports up to 10 preset positions (the first 10) configured on the PTZ
cameras. You can configure up to 20 settings for auto cruising on the NVR. In
other words, the NVR supports maximum 10 selections on the drop-down menu and
20 settings on the auto cruising list.