QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 34)

34
4.
You must enter the administrator name and password to perform quick setup. The
default administrator name and password are as below:
Use name: admin *
Password: admin
*If you are using the VS-201/VS-101/NVR-104, the default login name is
‘administrator’ and the login password is ‘admin’.
Note: Make sure all the IP cameras are configured and connected to the network.
5.
The quick configuration page will be shown. Click ‘Continue’ and follow the
instructions to finish the configuration. For further information, please refer to
Chapter 6.1.