Grain Systems Bin Accessories PNEG-1451 User Manual
Page 57
6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
57
Location of Field Drilled Holes for Base Ladder Starter Brackets
Before installing the starter brackets, field drill two (2) 3/8" holes 2.66" below and directly in line with the
top horizontal seam holes located in the sixth ring from the bottom of the tank. The first hole, for the
right hand starter bracket, must be located 9-3/8" from the center of the left hand base platform mounting
angle to the center of the hole. The second hole, for the left hand bracket, must be located 18-3/4" from
the center of the first hole.
for the proper location of the two (2) 3/8" field drilled holes
required to install the starter brackets.
Figure 6X
Base platform
mounting angles.
for
installation details.