Grain Systems Bin Accessories PNEG-1451 - Manual (Page 76)

7. 4.00" Corrugation Farm Commercial Hopper Tanks (FCHT) 4-6 Rings
76 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Access Door Platform Mounting Angle Installation
Figure 7Q shows the location of the access door platform mounting angles. Each angle must be mounted
starting 16" above the top horizontal seam of the bottom ring and installed in the stiffeners located on each
side of the access door. When installed correctly, these angles should be offset from the eave platform
mounting angles 37-1/2". Pay careful attention when installing these angles. The dimensions and
locations of these angles are very critical to assure proper fit of all parts.
Figure 7Q
Eave platform mounting angles shown
for reference only.
See Page 71 for
proper installation.