Grain Systems PNEG-1510 - Manual (Page 44)

8. Installation
44 PNEG-1510 Top Dry 24', 30' and 36' Manual Batch
30' Leveling Band Post Installation
Install the leveling band posts on the floor as shown in Figure 8H .
The fourth, seventh and tenth holes in the floor sheets indicate the location of the leveling band posts.
Attach with 5/16" x 1-1/4" bin bolts (S-277). In the fourth and seventh hole there will be ten (10) posts
(one at every third sheet). In the tenth hole there will be six (6) posts one every fifth.
Figure 8H