Grain Systems PNEG-1510 - Manual (Page 55)

PNEG-1510 Top Dry 24', 30' and 36' Manual Batch 55
9. Assembly
Center Cone Assembly
Bolt the sections together to form perforated cone as shown in Figure 9A . Use 1/4" x 5/8" bolts and nuts
to attach sections together.
Figure 9A
Center Cone Installation
Install cone over the center collar. Fasten cone assembly with twelve (12) #10 x 3/4" self-drilling screws
(S-280).
(See Figure 9B.)
Figure 9B