Outer dump chutes – Grain Systems PNEG-1510 User Manual
Page 48
Advertising
8. Installation
48
PNEG-1510 Top Dry 24', 30' and 36' Manual Batch
Outer Dump Chutes
Bolt a angle dam (TD-100598) to each dump chute using three (3) 1/4" x 5/8" bolts and nuts, as shown
. Use 1/4" x 5/8" bolts and double nuts to fasten dump chutes to hopper. Do not tighten first
nut down. Lock second nut to first nut and make sure chutes raise and lower FREELY.
Figure 8N
Advertising