Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 - Manual (Page 105)

12. Parts List
PNEG-720-G2 12" and 16" Series II Sweep 105
All 12" Sweep Jack Supports and 16" Jack Supports after 11-01-04 Parts List
Ref # Part # Description Qty
1 GC06974 Caster Wheel 3" x 8" Dia. x 3/4" Axle 1
1.1 S-6638 Bolt, HHCS 3/4"-10 x 5-1/2" ZN Grade 8 1
1.2 S-233 Split Lock Washer 3/4" ZN 1
1.3 S-234 Hex Nut 3/4"-10 ZN Grade 5 1
2 GC08507 S2 Sweep Jack Caster Assembly - 12" 1
3 S-8441 Pin 1
4 GC07934 S2 Sweep 7000# Jack Assembly 1
4.1 S-7528 Bolt, HHCS 1/2"-13 x 1-1/2" ZN Grade 5 4
4.2 S-236 Split Lock Washer 1/2" ZN 4
4.3 S-7510 Hex Nut 1/2"-13 ZN Grade 5 4
5 GC07839 Jack Mount Assembly 1
5.1 S-8400 Bolt, HHCS 1/2"-13 x 3-3/4" ZN Grade 5 4
5.2 S-236 Split Lock Washer 1/2" ZN 4
5.3 S-7510 Hex Nut 1/2"-13 ZN Grade 5 4
6 GC07926 S2 Sweep Jack Mount Plate Assembly 1
7 GC07931 S2 Sweep Jack Truss Assembly - 16" 1
7.1 S-7528 Bolt, HHCS 1/2"-13 x 1-1/2" ZN Grade 5 4
7.2 S-236 Split Lock Washer 1/2" ZN 4
7.3 S-7510 Hex Nut 1/2"-13 ZN Grade 5 4
N/S GC08627 BOP: Jack Kit 12" (Contains all above parts less wheel) 1