Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 - Manual (Page 13)

2. Safety Decals
PNEG-720-G2 12" and 16" Series II Sweep 13
Figure 2B
Decal “E”
Location:
Corner of motor mount
Size: 4-1/2" x 2"
Part No.: DC-994
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
DANGER DANGER
Decal “F”
Location:
Top of belt guard
Size: 4-1/2" x 2"
Part No.: DC-995
WARNING
Shear point. Keep hands
clear of moving parts. Do
not operate with guard
removed. Disconnect
and lockout power before
servicing.
DC-995
Decal “G”
Location:
Corner of motor plate
Size: 2-13/16" x 17/16"
Part No.: DC-889
D
C
-8
8
9
DANGER DANGER
Decal “H”
Location:
Corner of mount plate
Size: 4" x 1-3/4"
Part No.: DC-1382
SHEAR POINT
Moving parts can
crush and cut. Keep
hands clear of
sprocket and chain.
DC-1382
DANGER DANGER
Decal “I”
Location:
One per section centered on back of top flange
Size: 9" x 3-3/4"
Part No.: DC-834
1. Keep all safety shields and devices in place.
2. Keep hands, feet, hair, loose clothing, and other objects away
from moving parts.
3. Do not operate the machine unless visitors, children, and all other
untrained personnel are well clear of the machine and work area.
4. Stop the machine and lock out power to clean, lubricate, service,
or adjust.
5. Read operation and assembly manual completely before using
equipment.
Failure to heed these warnings will
result in serious injury or death.
DC-834
Rotating flighting
can kill or dismember
.
DANGER DANGER