Key alignment – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 User Manual
Page 33
Advertising
![background image](/manuals/277865/33/background.png)
5. Assembly
PNEG-720-G2 12" and 16" Series II Sweep
33
Key Alignment
A. Place key in keyway on drive shaft.
B. Make sure key is flat (parallel to drive shaft) in keyway as in
. NOT
like
Figure 5N
CAUTION
All keys should be parallel to the drive shaft. If the key is not straight (parallel) the
gear box quill sleeve will crack.
THIS TYPE OF DAMAGE IS NOT COVERED BY WARRANTY.
Advertising