Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 - Manual (Page 28)

5. Assembly
28 PNEG-720-G2 12" and 16" Series II Sweep
Hanger Bracket Assembly
A. Bolt the nylon bearings and hanger brackets to the connecting stubs using hex bolts, lock washers
and hex nuts as shown in Figure 5E .
Figure 5E
B. Bolt the hanger brackets to the back shields using two (2) 5/8"-11 x 2" hex bolts, two (2) square
washers, two (2) lock washers and two (2) hex nuts as shown in Figure 5F .
Figure 5F