Motor installation, Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 User Manual
Page 41
Advertising
![background image](/manuals/277865/41/background.png)
5. Assembly
PNEG-720-G2 12" and 16" Series II Sweep
41
Motor Installation
A. Level the Top Plate Assembly by adjusting the 1" nuts and washers on the adjustment rods.
B. Line up the end face of the shafts as closely as possible before bolting motor to mounting plate.
Figure 5W
C. Fasten the motor to the motor mount using hex bolts, lock washers and hex nuts.
Motor Bolt Chart
Motor Size
Hex Bolt Size
Qty
213T
3/8"-16 x 1-1/4"
4
215T
3/8"-16 x 1-1/4"
4
254T
1/2"-13 x 1-3/4"
4
256T
1/2"-13 x 1-3/4"
4
284T
1/2"-13 x 1-3/4"
4
286T
1/2"-13 x 1-3/4"
4
Motor bolt
Advertising