Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 User Manual
Page 26
Advertising
5. Assembly
26
PNEG-720-G2 12" and 16" Series II Sweep
B. (All 16" Models and 12" Models with extensions) Assemble the end caster to the end caster
assembly using the 1/2" x 3-1/2" clevis pin and 1/8" pin clip as shown in
.
C. Attach the end caster assembly to the end of the tail section using two (2) 1"-8 hex nuts.
Figure 5A
D. Use eight (8) 5/8"-11 x 1-3/4" grade 8 hex bolts, lock washers and hex nuts at each section connection.
Figure 5B
CAUTION
The bolts MUST be installed as shown in
.
Advertising