Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 - Manual (Page 27)

5. Assembly
PNEG-720-G2 12" and 16" Series II Sweep 27
Flighting Assembly
A. Lay out the flight sections in order of assembly starting with the head flight working towards the
tail flight. (See Figure 5C.)
B. Using the connecting stubs, bolt the flight sections together with hex bolts and lock nuts. Make sure
the flight ends are in time with each other.
Figure 5C
C. Slide the end stub through the bearing plate on the tail section and into the tail flight securing it with
hex bolts and lock nuts. (See Figure 5D.)
Figure 5D