Counterweight placement – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 User Manual
Page 38
Advertising
![background image](/manuals/277865/38/background.png)
5. Assembly
38
PNEG-720-G2 12" and 16" Series II Sweep
Counterweight Placement
A. Place an equal number of counterweights on each side of the drive assembly on the six inch (6")
channels that are welded to the tail section.
Figure 5S
CAUTION
Use proper lifting procedures and equipment when lifting counterweights. Each
counterweight weighs 175 pounds.
Advertising