QTECH QSW-8300 Инструкция по настройке - Manual (Page 102)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
101
transmit
no transmit
assigned action.
3. Apply QoS to port or VLAN interface
Command Explanation
Interface Configuration Mode
mls qos trust {cos | dscp}
no mls qos trust {cos | dscp}
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {<default-cos>}
no mls qos cos
Configure the default CoS value of the
port; the no command restores the default
setting.
service-policy input <policy-map-name>
no service-policy input <policy-map-name>
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port. Egress
policy map is not supported yet.
Global Mode
service-policy input <policy-map-name> vlan
<vlan-list>
no service-policy input <policy-map-name>
vlan <vlan-list>
Apply a policy map to the specified VLAN
interface; the no command deletes the
specified policy map applied to the VLAN
interface.
4. Configure queue management algorithm and weight
Command Explanation
Port Configuration Mode
mls qos queue algorithm {sp | wdrr}
no mls qos queue algorithm
Set queue management algorithm, the
default queue management algorithm is
wdrr.
Global Mode
mls qos queue wdrr weight <weight0..weight7>
no mls qos queue wdrr weight
Set wdrr queue weight for all ports
globally, the default queue weight is 1 1 1
1 1 1 1 1.
5. Configure QoS mapping
Command Explanation
Global Mode
mls qos map (cos-
dp <dp1…dp8> | dscp-dscp
Set the priority mapping for QoS, the no