QTECH QSW-8300 Инструкция по настройке - Manual (Page 59)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
58
Switch B:
Switch(config)#vlan 7;9;10
Switch(config)#interface ethernet 1/0/7
Switch(Config-If-Ethernet1/0/7)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/7)#switchport hybrid native vlan 7
Switch(Config-If-Ethernet1/0/7)#switchport hybrid allowed vlan 7;10 untag
Switch(Config-If-Ethernet1/0/7)#exit
Switch(Config)#interface Ethernet 1/0/9
Switch(Config-If-Ethernet1/0/9)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/9)#switchport hybrid native vlan 9
Switch(Config-If-Ethernet1/0/9)#switchport hybrid allowed vlan 9;10 untag
Switch(Config-If-Ethernet1/0/9)#exit
Switch(Config)#interface Ethernet 1/0/10
Switch(Config-If-Ethernet1/0/10)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/10)#switchport hybrid native vlan 10
Switch(Config-If-Ethernet1/0/10)#switchport hybrid allowed vlan 7;9;10 untag
Switch(Config-If-Ethernet1/0/10)#exit
9.2 GVRP Configuration
9.2.1 Introduction to GVRP
GVRP, i.e. GARP VLAN Registration Protocol, is an application of GARP (Generic Attribute
Registration Protocol ). GARP is mainly used to establish an attribute transmission mechanism to
transmit attributes, so as to ensure protocol entities registering and deregistering the attribute.
According to different transmission attributes, GARP can be divided to many application
protocols, such as GMRP and GVRP. Therefore, GVRP is a protocol which transmits VLAN
attributes to the whole layer 2 network through GARP protocol.