QTECH QSW-8300 Инструкция по настройке - Manual (Page 298)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
297
31.2 VRRP Configuration Task List
Configuration Task List:
Create/Remove the Virtual Router (required)
Configure VRRP dummy IP and interface (required)
Activate/Deactivate Virtual Router (required)
Configure VRRP sub-parameters (optional)
Configure the preemptive mode for VRRP
Configure VRRP priority
Configure VRRP Timer intervals
Configure VRRP interface monitor
1. Create/Remove the Virtual Router
Command Explanation
Global Mode
router vrrp <vrid>
no router vrrp <vrid>
Creates/Removes the Virtual Router.
2. Configure VRRP Dummy IP Address and Interface
Command Explanation
VRRP protocol configuration mode
virtual-ip <ip>
no virtual-ip
Configures VRRP Dummy IP address; the "no
virtual-ip" command removes the virtual IP
address.
interface {IFNAME | Vlan <ID>}
no interface
Configures VRRP interface, the "no interface"
command removes the interface.
3. Activate/Deactivate Virtual Router
Command Explanation
VRRP protocol configuration mode
enable Activates the Virtual Router.
disable Deactivates the Virtual Router.
4. Configure VRRP Sub-parameters
(1) Configure the preemptive mode for VRRP
Command Explanation
VRRP protocol configuration mode
preempt-mode {true| false} Configures the preemptive mode for VRRP.