QTECH QSW-8300 Инструкция по настройке - Manual (Page 54)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
53
3. Assigning Switch ports for VLAN
4. Set the Switch Port Type
5. Set Trunk port
6. Set Access port
7. Set Hybrid port
VLAN Mode
name <vlan-name>
no name
Set or delete VLAN name.
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN.
Command Explanation
Port Mode
switchport mode {trunk | access | hybrid}
Set the current port as Trunk, Access or
Hybrid port.
Command Explanation
Port Mode
switchport trunk allowed vlan {WORD | all |
add WORD | except WORD | remove WORD}
no switchport trunk allowed vlan
Set/delete VLAN allowed to be crossed by
Trunk. The “no” command restores the
default setting.
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
Command Explanation
Port Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified VLAN.
The “no” command restores the default
setting.
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD | all | Set/delete the VLAN which is allowed by