QTECH QSW-8300 Инструкция по настройке - Manual (Page 332)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
331
Configure reflector port
Configure remote VLAN of mirror group
1. Configure RSPAN VLAN
2. Configure mirror source port
3. Configure mirror destination port
Command Explanation
Global Mode
monitor session <session> destination
interface <interface-number>
no monitor session <session> destination
interface <interface-number>
To configure mirror destination interface; The
no command deletes the mirror destination
port.
4. Configure reflector port
Command Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as RSPAN
VLAN. The no command will remove the
configuration of RSPAN VLAN.
Command Explanation
Global Mode
monitor session <session> source
{interface <interface-list>} {rx| tx| both}
no monitor session <session> source
{interface <interface-list>}
To configure mirror source port; The no
command deletes the mirror source port.
Command Explanation
Global Mode
monitor session <session> reflector-port
<interface-number>
no monitor session <session> reflector-
port
To configure the interface to reflector port;
The no command deletes the reflector port.