QTECH QSW-8300 Инструкция по настройке - Manual (Page 28)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
27
Command Explanation
Global configuration mode or port configuration mode
uldp reset
Reset all ports in global configuration mode;
Reset the specified port in port
configuration mode.
9. Display and debug the relative information of ULDP
Command Explanation
Admin mode
show uldp [interface ethernet IFNAME]
Display ULDP information. No parameter
means to display global ULDP information.
The parameter specifying a port will display
global information and the neighbor
information of the port.
debug uldp fsm interface ethernet
<IFname>
no debug uldp fsm interface ethernet
<IFname>
Enable or disable the debug switch of the
state machine transition information on the
specified port.
debug uldp error
no debug uldp error
Enable or disable the debug switch of error
information.
debug uldp event
no debug uldp event
Enable or disable the debug switch of event
information.
debug uldp packet {receive|send}
no debug uldp packet {receive|send}
Enable or disable the type of messages can
be received and sent on all ports.
debug uldp {hello|probe|echo| unidir|all}
[receive|send] interface ethernet <IFname>
no debug uldp {hello|probe|echo|
unidir|all} [receive|send] interface ethernet
<IFname>
Enable or disable the content detail of a
particular type of messages can be received
and sent on the specified port.