QTECH QSW-8300 Инструкция по настройке - Manual (Page 61)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
60
2. Configure port type
3. Enable GVRP function
9.2.3 Example of GVRP
GVRP application:
Typical GVRP Application Topology
To enable dynamic VLAN information register and update among switches, GVRP protocol is
to be configured in the switch. Configure GVRP in Switch A, B and C, enable Switch B to learn
VLAN100 dynamically so that two workstations connected to VLAN100 in Switch A and C can
Command Explanation
Port mode
gvrp
no gvrp
Enable/ disable GVRP function of port.
Command Explanation
Global mode
gvrp
no gvrp
Enable/ disable the global GVRP
function of port.
PC
PC
Switch A
Switch B
Switch C