QTECH QSW-8300 Инструкция по настройке - Manual (Page 317)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
316
Configure ULPP group
Show and debug the relating information of ULPP
1. Create ULPP group globally
2. Configure ULPP group
Command Explanation
ULPP group configuration mode
preemption mode
no preemption mode
Configure the preemption mode of ULPP
group. The no operation deletes the
preemption mode.
preemption delay <integer>
no preemption delay
Configure the preemption delay, the no
operation restores the default value 30s.
control vlan <integer>
no control vlan
Configure the sending control VLAN, no
operation restores the default value 1.
protect vlan-reference-instance <instance-
list>
no protect vlan-reference-instance
<instance-list>
Configure the protection VLANs, the no
operation deletes the protection VLANs.
flush enable mac
flush disable mac
Enable or disable sending the flush packets
which update MAC address.
flush enable arp
flush disable arp
Enable or disable sending the flush packets
which delete ARP.
description <string>
no description
Configure or delete ULPP group description.
Port mode
ulpp control vlan <vlan-list>
no ulpp control vlan <vlan-list>
Configure the receiving control VLANs, no
operation restores the default value 1.
ulpp flush enable mac
ulpp flush disable mac
Enable or disable receiving the flush packets
which update the MAC address.
ulpp flush enable arp
ulpp flush disable arp
Enable or disable receiving the flush packets
which delete ARP.
ulpp group <integer> master
no ulpp group <integer> master
Configure or delete the master port of ULPP
group.
Command Expalnation
Global mode
ulpp group <integer>
no ulpp group <integer>
Configure and delete ULPP group
globally.