QTECH QSW-8300 Инструкция по настройке - Manual (Page 114)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
113
no service-policy output<policy-map-
name>
the no command deletes the specified policy
map applied to the port.
Global Mode
service-policy output <policy-map-name>
vlan <vlan-list>
no service-policy output <policy-map-
name> vlan <vlan-list>
Apply a policy map to the egress of the VLAN;
the no command deletes the specified policy
map applied to the VLAN interface.
4. Set Egress QoS remark mapping
Command Explanation
Global Mode
mls qos map {cos-cos | cos-dscp} {green |
yellow | red} <value1> <value2>…<value8>
no mls qos map {cos-cos | cos-dscp} {green |
yellow | red}
Set Egress cos mapping, no command
resotores the default configuration.
mls qos map {dscp-cos | dscp-dscp} {green |
yellow | red} <dscp list> to <value>
no mls qos map {dscp-cos | dscp-dscp} {green
| yellow | red}
Set Egress dscp mapping, <dscp-list>
means 1 to 8 dscp values, no command
restores the default configuration.
mls qos egress green remark
no mls qos egress green remark
Set Egress QoS remark mapping to take
effect for green packets, no command
does not take effect to green packets.
5. Clear accounting data of the specific ports or VLANs
Command Explanation
Admin Mode
clear mls qos statistics [interface <interface-
name> | vlan <vlan-id>]
Clear accounting data of the specified ports
or VLAN Policy Map. If there are no
parameters, clear accounting data of all
policy map.
6. Show QoS configuration
Command Explanation
Admin Mode
show mls qos {interface [<interface-id>]
[policy | queuing] | vlan <vlan-id>}
Show QoS configuration of the port.
show class-map [<class-map-name>] Show the class map information of QoS.
show policy-map [<policy-map-name>] Show the policy map information of QoS.