YSI DIQ/S 182 XT-4-MOD - Manual (Page 104)

Relay outputs System 182 XT-4
6 - 14 ba76028e01 02/2012
6.4 Setting table for relays
6.4.1 Functions and settings
To set a relay, its function has to be selected first. Then the relevant
setting table is displayed:
Relay function and
relevant setting tables
Function Setting table
No function The relay output is not used.
System monitoring See section 6.4.2
Sensor monitoring See section 6.4.3
Limit indicator See section 6.4.4
Frequency output See section 6.4.5
Pulse-width output See section 6.4.6
Sensor controlled See section 6.4.7
Cleaning See section 6.4.8
Manual control See section 6.4.9