4 top hat rail mounting, Top hat rail mounting -30, Section 3.7.4) – YSI DIQ/S 182 XT-4-MOD User Manual
Page 44: Mount
Installation
System 182 XT-4
3 - 30
ba76028e01
02/2012
3.7.4
Top hat rail mounting
Materials required
THS/IQ kit for top hat rail mounting (see chapter 12 A
Tools
Phillips screwdriver.
Mount
DIQ/S 182 XT-4-MOD on
top hat rail mounting
Fig. 3-21
Mount
DIQ/S 182 XT-4-MOD on top hat rail mounting
1
Screw the clamping assembly (item 1 in Fig. 3-21) with the two
plastic self-tapping screws (item 2) onto the back of the DIQ/
S 182 XT-4-MOD.
2
Attach the DIQ/S 182 XT-4-MOD to the top hat rail from above
using the clamping assembly and press against the rail until
the clamping assembly clicks into place. The DIQ/S 182 XT-4-
MOD can subsequently be pushed sideways.
3
To unhook the DIQ/S 182 XT-4-MOD, press it downwards and
pull it forwards at the bottom.
For sta
ck m
ounting
re
move
label
an
d insta
ll contact carrier
1
2