YSI DIQ/S 182 XT-4-MOD - Manual (Page 34)

Installation System 182 XT-4
3 - 20 ba76028e01 02/2012
Fig. 3-12 Prepared cable end
Connecting the cables The SNCIQ and SNCIQ/UG cables are connected to the terminal strip
in the same way as the SACIQ sensor connection cable (see
section 3.6.5):
SNCIQ
SNCIQ/UG
approx. 35 mm approx. 45 mm
approx. 45 mm
1 Open the enclosure of the DIQ/S 182 XT-4-MOD or the
MIQ module.
2 Select a free SENSORNET connection. At the same time, look
out for the SENSORNET designation on the label on the
bottom of the enclosure.