YSI DIQ/S 182 XT-4-MOD - Manual (Page 42)

Installation System 182 XT-4
3 - 28 ba76028e01 02/2012
3.7.3 Panel mounting
Materials required  PMS/IQ kit for panel mounting (see chapter 12 A
CCESSORIES AND
OPTIONS ).
Tools  3 mm set screw wrench (contained in the panel installation kit).
Switch panel aperture
Fig. 3-19 Mounting aperture in the switch panel (dimensions in mm)
Note
The space required on the panel for DIQ/S 182 XT-4-MOD is given in
the dimension drawings in section 10.5.
Mounting the DIQ/
S 182 XT-4-MOD in a
switch panel
138
138
34.5 47 11 11
4
Maximum thickness
3 mm
1 Unscrew the DIQ/CR3 combi output module from the DIQ/
S 182 Universal Transmitter.
2 Insert the DIQ/S 182 Universal Transmitter in the panel
aperture from the front.