YSI DIQ/S 182 XT-4-MOD User Manual
Page 28
Advertising
Installation
System 182 XT-4
3 - 14
ba76028e01
02/2012
Stacking the
MIQ modules
Fig. 3-5
Stacking the MIQ modules (variant 1)
Fig. 3-6
Closing the enclosure (variant 1)
7
Attach the prepared DIQ/S 182 XT-4-MOD onto the cover of
the MIQ module. At the same time, ensure that the two clips on
the DIQ/S 182 XT-4-MOD click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-4).
8
Close the cover of the DIQ/S 182 XT-4-MOD and fix it in place
with the two countersunk bolts (pos. 7 in Fig. 3-6).
MIQ module
DIQ/S 182 XT-4-PR
7
MIQ module
DIQ/S 182 XT-4-PR
Advertising