YSI DIQ/S 182 XT-4-MOD - Manual (Page 134)

What to do if ... System 182 XT-4
9 - 2 ba76028e01 02/2012
The selected system
language was not
activated for a sensor
9.3 Replacing system components
9.3.1 Replacing passive components
Passive components include all components that the controller cannot
recognize.
These include:
 MIQ power supply modules
 DIQ/JB
 DIQ/CHV
 Cables (SNCIQ, SACIQ).
Warning
If the DIQ/S 182 XT-4-MOD and MIQ/PS power supply module is
opened during operation, there is a danger to life due to possible
hazard of electric shock. Before opening the Universal
Transmitter, switch off the system and, if necessary, all external
relay circuits that present a hazard of electric shock and secure
the system against being switched on again.
Only ever replace components when the system is switched off.
Defective components are removed in the reverse order to the
installation (see chapter 3 I
NSTALLATION ).
Cause Remedy
– A system language was selected
that is not available in the
sensor.
The English language was
activated instead of the selected
system language.
– Contact YSI,
a software update is
required for the respective
components