YSI DIQ/S 182 XT-4-MOD User Manual
Page 51
Advertising
System 182 XT-4
Installation
3 - 37
ba76028e01
02/2012
Connecting the power
line
Fig. 3-26 Inserting the supply line.
5
Open the enclosure of the DIQ/S 182 XT-4-MOD (front
terminal strip).
6
Screw a cable gland (pos. 1 in Fig. 3-26) with sealing ring (pos.
2) into the enclosure below the power supply connection.
7
Loosen the coupling ring (pos. 3).
8
Feed the power line through the cable gland into the enclosure.
When doing so bend the flexible divider (pos. 4) to the right.
1
3
2
4
L
N
Advertising